Damp Proofing / WaterproofingORDER FORM All Prices Excl. GST  Crystal Sealer
Waterproofing compoundA cement based waterproofing compound that chemically rest with moist cement based substrates. Forms insoluble crystals in the capillary tracts of the substrate permanently waterproofing the surface yet still allowing the surface to breathe. Features: Penetrates into and becomes a permanent integral part of the surface, therefore it can not peel or blister off as do normal coatings. Will not tear or puncture and does not have to be protected from back fill. Being a cement based material has an expansion and contraction the same as the cement surface to which it is applied. Product Information Sheet, Material Safety Data Sheet, Architectural and Building Specifications. Price $22.00 (4kg) / $62.50 (20kg)  Crystal Patch & Plug
A very fast setting crystal forming patching compound - set in 1-2 minutes at 22degreesCA fast setting non-shrink, non-slump cement based pathing compound that stops flowing water in seconds and seals cracks and defects in concrete using crystal growth technology. Features: Set in 1-2 minutes at 20C, non toxic, high strength 2Mpa, a durable masonry compound. Product Information Sheet, Material Safety Data Sheet, Architectural & Building Specfications. Price $24.20 (4kg)  Dampcure
Liquid dampcourseA siloxame/solvent based material that is injected into the masonry to form a new damp-proofing course. Lines the masonry pores but does not actually block them entriely, allowing the masonry to 'breath' which facilitates rapid drying out of the affected masonry. Once cured, Dampcure causes a change in the interfacial tension (measured by the contact angle) between the capillary wall and the water preventing water entering the new barrier. Features: Simple to use and install, provides a water repellent barrier, prevents soluble salt blooming, does not alter the breathing characteristics of the masonry, in most cases does not change the surface appearance, tests show years of reliable damp-proofing. Product Information Sheet, Material Safety Data Sheet, Architecturual & Building Specifications. Price $60.00 (4L) / $248.00 (20L)  Epecrete
Multipurpose, water based, epoxy moisture barrierA multipurpose, water based, three-pack epoxy resin. Epecrete has excellent adhesion to most correctly prepared building surfaces such as brick, block, concrete and masonry. Features: Three-pack, for use as a chemically resistant and waterproof bonding agent, curing membrane, concrete sealer, repair mortar and waterproof paint. Product Information Sheet, Material Safety Data Sheet, Architecturual & Building Specifications. Price $49.00 (3kg kit) / $150.00 (12kg kit)  Shower Fix
Waterproofs tiled areas without removing tilesA siloxame/solvent based material that penetrates deep into the grout and porous tiles, forming a water-repellent barrier. Is not a coating, coatings fail if chipped or scratched and wear due to ordinary cleaning. Coatings need to be reapplied constantly and once damaged are next to useless. Features: Clear and colourless, simple and fast to apply, allows grout and tiles to breathe. Is not a coating, does not fail due to chips or scratches, do not have to remove tiles. Product Information Sheet, Material Safety Data Sheet, Architecturual & Building Specifications. Price $18.00 (500ml) Waterproofing Membranes  Hydrathane
Water-based polyurethane waterproofing membraneA one-part water based polyurethane waterproofing membrane which is flexible, tough and fast curing. The cured membrane will remain tough elastic and can bridge and seal hairline cracks. Internal wet areas must be waterproofed in accordance with AS3740 and AS4654.2 and local regulations. Features: A tough elastic membrane, UV stable, suitable for maintenance foot traffic. Compatible with Construction Chemicals ceramic tile adhesives, does not stain tile grout or marble, fast drying trafficable afer 6-12 hours. Product Information Sheet, Material Safety Data Sheet, Architecturual & Building Specifications. Price $52.00 (4L) / $163.00 (15L)  Flexible Sealer
One-pack waterproofing membrane applied prior to tiling bathrooms & balconies or left exposed on roofs & balconiesA premised one-pack, water based, brush/roller applied, acrylic membrane, which when cured becomes a tough elastic heavy duty UV resistance waterproof membrane. The cured membrane will remain elastic and can bridge and seal hair-line cracks and can resist mild chemical attack. Internal wet areas must be waterproofed in accordance with AS3740 and AS4654.2 and local regualtions. Features: Easy to apply - doest not require mixing, application equipment washes clean in water. Fully flexible coating that will accommodate extremes in movement. Excellent UV light resistance, hygienic coating that can be used in direct contact with food and drinking water. Excellent adhesion to most common building materials after correct surface preparation. Bridges and seals hair-line cracks, can be overpainted with water baseds paints to match surroundings, white in colour. Product Information Sheet, Material Safety Data Sheet, Architecturual & Building Specifications. Price $40.00 (4L) / $130.00 (15L)  Liquid Flash 1
Microfibre reinforced waterproofing membraneA premixed one-pack, grey, waterbaseed, microfibrre reinforced acrylic flexible waterproofing membrane that is easily applied with a brush to form a resilient waterproof/flashing membrane between different building surfaces. Will remain pliable and elastic and will bridge cracks and smooth irregular surfaces. The cured membrane is resistant to UV and mild chemical attack. Internal wet areas must be waterproofed in accordance with AS3740 and AS4654.2 and local regulations. Features: Easy to apply - apply straight from the bucket, permanently flexible microfibre reinforced membrane. Excellent UV light resistance and adhesion to correctly prepared surfaces. Bridges cracks, colour - Grey and can be overpainted with waterbaseed acrylic paints to colour match surroundings. Product Information Sheet, Material Safety Data Sheet, Architecturual & Building Specifications. Price $16.00 (1L) / $46.00 (4L) / $105.00 (10L) / $155.00 (15L)  Liquid Flash 2
Two-pack, fast drying, microfibre reinforced, waterproofing membraneA two-pack fast drying, microfibrre reinforced, cement/acrylic flexible waterproofing membrane that is easily applied to form a resilient waterproof membrane over different building surfaces. Will remain pliable and elastic and will bridge cracks and smooth irregular surfaces. Internal west areas must be waterproofed in accordance with AS3740 and AS4654.2 and local regulations. Features: Pre-reinforced, easy to apply, suitable for intenal uses (externally must be covered with tiles, external coating, screed or earth). Fast drying, swimming pools (prior to tiling). Product Information Sheet, Material Safety Data Sheet, Architecturual & Building Specifications. Price $50.00 (4L & 4kg) / $170.00 (20L & 20kg) - 2x10kg | 
